Cone Crusher work principle?

Broken cone crusher in the Crushing role and cycles Crusher basically the same. Cone also used movable and fixed Cone conducted between the working face of broken ore. Moving Cone Bearing in spherical bearings, and the hoisting shaft in a fixed axis, the vertical axis placed eccentric sleeve, and the eccentric sleeve is placed on the thrust bearing.

Moving Cone together with the vertical axis driven by the eccentric bushings, eccentric bushings through horizontal axis and the bevel gear and pulley to drive. Pulley triangular belt from the motor drive. The vertical axis in the lower load eccentric sleeve, when the eccentric sleeve rotation, to draw a cone axis surface. Therefore Fixed Fixed Cone Cone, near the ore shall crush. Chassis by the upper and lower composed of two parts, connected by bolts. Bolt on kits in a strong spring, when spring is the role of metal or other hard objects falling into the crushing chamber, will not damage Crusher (such as spindle, etc.). If there is a metal or other hard objects (nuts, brazing first class) and the ore went into crushing chamber, was not moving cone raised, Pai mine mouth could be increased from. Sometimes cone crusher is used hydraulic (or pressure) device to adjust the size of Pai mine mouth.

Ore from the mine mouth was falling into the machine through distribution, distribution disk installed in the vertical-axis, vertical axis of rotation, and access to vibration, uniform distribution of the ore in the cone around. With the help of hinge rod handle and hinge so that the fixed cone rise or fall in order to regulate the width of the mouth ore row. All components are manufactured with cast steel, dynamic cone and fixed the Face Insert cone liner to manganese steel to protect the cone from wear, worn liner can be replaced, the replacement, and the liner inserted between the melting cone Lead close bonding between them.

Minor cone crusher, called short head cone crusher, or called "circular grinding." It Cone Crusher broken in the structure basically the same, the only difference lies in its dynamic cone and fixed cone shape different. Short head cone crusher dynamic cone and fixed cone than shorter, but the parallel between the two cone with a long, Pai to the mine mouth and the mouth relatively small mine, so can be smaller products (5-10 mm) .

In addition to the standard head - and short-cone crusher, there are between between them called a medium-sized cone crusher, can be used in the broken can also be used minor. The standard, medium, short head cone crusher is the main difference between the cross-section shape crushing chamber different. Therefore, the size and exclusive to mine ore particle size are different.

Cycles Crusher for rough broken, the standard for Cone broken ore in the broken machine, the first short-cone crusher for the minor. , Minor cone crusher with the specifications fixed at the bottom cone diameter D said.